How to Use Dash Glasses | Setup & Controls Guide
How to set up your Dash Glasses
Pick the model you have. Setup takes under a minute.
Dash A1 and Dash S1 Audio Glasses
No app needed. These pair like any Bluetooth headphone.
Step 1: Find your touch panel
The touch panel sits on the outer side of each temple, near the hinge. It looks different depending on which batch your pair came from, and both are correct:
- On some pairs you will see a small red dash.
- On others the marking is the same colour as the temple. Run a fingertip along that spot and you will feel a raised embossed line. That is the panel.
Step 2: Power on. Both sides, separately
Each temple powers on independently. There is a speaker and a battery in each side, so switching on one side does not switch on the other. Do this twice, once per side.
- Tap and hold the touch panel for 5 seconds. You will hear a beep.
- Repeat on the other temple.
Some batches speak instead of beeping and say "Power On", then "Connected" about a second later. Most simply beep. Both are correct, and neither means anything is wrong with your pair.
Not sure whether a side came on? Wear the glasses and tap that touch panel once. If you hear a soft tap sound in that ear, that side is on. If you hear nothing, that side is still off, so tap and hold it for 5 seconds.
Step 3: Pair with your phone
- Open Bluetooth settings on your phone.
- Tap Dash Glasses in the list.
- You will hear a confirmation, either a beep or the word "Connected" depending on your batch. Play any song to be sure.
Step 4: Controls
| Gesture | What it does |
|---|---|
| Tap once | Play or pause music. Answer an incoming call. |
| Double tap | Next song on the right side. Previous song on the left side. |
| Tap and hold 2 seconds | Wake your phone assistant, Google Gemini or Apple Siri. Reject an incoming call. |
| Tap and hold 5 seconds | Power on or off. |
| Tap while the camera app is open | Trigger a photo or video remotely. |
Remote photography. Open your camera or video app, then tap your glasses. Good for selfies, vlogs and anything hands-free.
On an iPhone, turn the volume limiter off. iOS caps headphone volume by default, which makes the glasses sound quieter than they are.
Go to Settings > Sounds & Haptics > Headphone Safety and switch off Reduce Loud Sounds.
Dash Echo AI Camera Glasses
Model V3 Pro. Watch the full walkthrough with sound on, or read the steps below it.
Step 1: Install the app first
Everything else is easier once the app is on your phone, because the app shows each control with graphics and walks you through pairing.
- Take out the guidebook from inside your Dash Echo box.
- Scan the app QR code printed in it. It sends you to the right store automatically, App Store on iPhone and Play Store on Android.
- Install the app, open it, and follow the steps it shows you to connect.
Step 2: Know your three controls
Wearing the glasses, there are three places you touch:
- Right button, on the top of the right side.
- Left button, on the top of the left side.
- Touch panel and volume slider, on the outer side of the right temple. It is one surface that does both.
Step 3: Switch on
Press and hold the right button for 5 seconds to switch on. Press and hold it for 5 seconds again to switch off.
Step 4: Controls
| Control | What it does |
|---|---|
| Right button, single tap | Take a photo. |
| Right button, double tap | Start recording a video. |
| Left button, single tap | Start a conversation with your AI assistant. You can also just say Hey Echo. |
| Slide along the touch panel | Volume up and down. |
| Touch panel, double tap | Play or pause music. |
| Touch panel, triple tap | Previous song. |
| Touch panel, tap and hold | Next song. |
| Either button while a call is ringing | Answer the call. Press again to end it. |
There is more inside the app. Dash Echo has several features beyond the ones above, and the app introduces each one with graphics as you use it. Install it once and it will guide you.
Dash Air Frameless Smart Glasses
No app needed. Dash Air works exactly like our audio glasses, with one difference in where you tap and one extra control.
Step 1: Find your touch panels
On Dash Air the panels are not on the outer sides. They are on the front bottom edge of each temple, left and right.
Run a fingertip along that bottom edge and you will feel a small raised dot. That dot marks the panel, so it tells you your finger is in the right place without looking.
Step 2: Power on
- Tap and hold the touch panel for 5 seconds.
- You will hear "Power On", then after about a second "Connected", which means both sides have synced.
Step 3: Pair with your phone
- Open Bluetooth settings on your phone.
- Tap Dash Glasses in the list.
- You will hear "Connected" again, confirming the phone.
Step 4: Controls
| Gesture | What it does |
|---|---|
| Slide along the right temple | Volume up and down. This slider is on the outer side of the right temple and is extra on Dash Air. |
| Tap once | Play or pause music. Answer an incoming call. |
| Double tap | Next song on the right side. Previous song on the left side. |
| Tap and hold 2 seconds | Wake your phone assistant, Google Gemini or Apple Siri. Reject an incoming call. |
| Tap and hold 5 seconds | Power on or off. |
| Tap while the camera app is open | Trigger a photo or video remotely. |
On an iPhone, turn the volume limiter off. Go to Settings > Sounds & Haptics > Headphone Safety and switch off Reduce Loud Sounds.
Dash V3 Camera Glasses
Your setup is guided entirely by the app, with graphics for every control.
Take the guidebook out of your box, scan the app QR code printed in it, and install the app. Open it and it will take you step by step through connecting your glasses and using every control.
Need help?
If anything does not work the way it reads here, our team will sort it out. Email hello@dashglasses.com or message us on Instagram @dashglasses.
